Anesthesia

The Genesis anaesthesia workstations meet your most ambitious requirements. They stand out for their lung protective ventilation, accuracy and performance, cost saving, design and ergonomics, safety and versatility.   TECHNICAL SPECIFICATION OPERATING DATA Weight – 105 kg Dimensions – 92 cm Wide x 68 cm Deep x 139 cm High (93 cm to the table surface) Packaging Dimensions – 105 cm Wide x 75 cm Deep x 160 cm High Operating voltage supply – 110 to 240 V~, 47 to 63 Hz (12 to 6 A) Power input – 120 W typically (max. 1.2 kW with auxiliary outlets used) Battery autonomy – 90 min typically Auxiliary power outlets – 4, with automatic protection O2, N2O and Air supply – 2.7 to 6.9 bar (39.1 to 100 psi) Screen – TFT 18.5″ (47 cm) projected capacitive touchscreen Protection class – Class I, gas analyser type BF defibrillation proof Classification – Class II b Storage – One front drawer with self-brake system and two back cabinets with door Lighting – LED bar below the screen controlled from the touchscreen Auxiliary integrated systems – Auxiliary 02 flow meter (0-15 L/min), Auxiliary 02 suppy valve (NF standard) and Suction device Communication ports – 1 x RS-232, 2 x USB, 1 x LAN Ethernet Fresh Gases (02, N20 and Air, electronically controlled) Fresh gas flow – 0 and 0.1 to 18 L/min 02/N20/Air Accuracy – 0.1 to 0.5 L/min = ±0.05 L/min; 0.5 to 18 L/min = ±10 % 02 concentration – 21 to 100% vol. with Air, 25 to 100% with N20 (minimum 200 ml/min 02) 02 Safety fresh gas (backup) – 0-0.2-0.4-0.7-1-1.5- 2- 3- 4- 6- 8-10-12-15 L/min 02 02 flush (+02) – 40 L/min standard (adjustable 25 – 75 L/min upon requirement) Breathing System (CABS) Autoclavable – 134 °C Weight of breathing system – 9.8 kg C02 absorber volume – 1.5 L Leakage – < 150 mL/min (at 30 hPa) Pressure limiting valve APL – 0 to 70 hPa Pressure relief valve – 125 hPa Vacuum safety valve – 0.3 hPa resistance at 60L/min – 5.80 hPa resistance at 60L/min – 2.90 hPa resistance at 30L/min – 3.55 hPa resistance at 30L/min – 0.89 hPa Internal Compliance at 30 hPa – 15 mL   VENTILATOR Operation / Ventilation Modes Volume controlled (VC) modes: Volume Controlled Ventilation (VCV) VC Synchronized Intermittent Mandatory Ventilation (VC-SIMV) VC-SIMV with Pressure Support (VC-SIMV-PS) * Pressure controlled (PC) modes: Pressure Controlled Ventilation (PCV) PC Synchronized Intermittent Mandatory (PC-SIMV) PC-SIMV with Pressure Support (PC-SIMV-PS) * Adaptive Pressure with Volume Guaranteed (APVG) modes (other trade names: Autoflow,PCVR, PRVC, AVAPS, VC+) Adaptive Pressure with Volume Guaranteed (APVG) * APVG Synchronized Intermittent Mandatory (APVG-SIMV) * APVG -SIMV with Pressure Support (APVG-SIMV-PS) * Pressure Support Ventilation (PSV) * (other trade names: PS, ASB, SPS, IPS)   Non-mechanical Operation / Ventilation Modes Manual ventilation through the CABS system (Auto/Manual software controlled) Spontaneous ventilation either through the bellows (auto mode) or through the bag (manual mode) Manual ventilation through the external fresh gas outlet for non-rebreathing systems (Bain, Mapleson, …) Application field: Neonates, Pediatrics & Adults Tidal volume – 5 to 1500 mL Inspiratory pressure – 0 to 68 hPa Ventilation frequency ­- 3 to 120/min Inspiratory time – 0.05 to 16.6s l:E ratio – 5:1 to 1:8 Inspiratory pause – 0 to 60% Inspiratory flow – max. 150 L/min PEEP – 0 to 30 hPa Flow trigger – 0.2 to 15 L/min Pressure support – 5 to 50 hPa Ramp time – 0.1 to 2 s Maximum pressure – 0 to 68 hPa   MONITORING 5″ (47 cm) projected capacitive touchscreen, supported on a 360° rotating and 2 axis tilting arm. Measurements displayed: Peak pressure; Plateau pressure; Mean pressure; Expiratory minute ventilation; Expiratory tidal volume; Inspiratory tidal volume; Expiratory volumeter; Breathing rate; Compliance and Resistance (in VC modes); Patient info (age, weight, MAC, Class ASA); Connected sensors; Battery status; Power supply status; Gases supply pressures for 02, N20 and Air; Inspiratory and expiratory concentration of 02, N20, C02 and Anaesthetic gas* Parametres charted as curves (up to 3 simultaneously): Airway pressure; Expiratory flow; Inspiratory flow; Volume; Fresh gases (Rotstyle); Concentration of 02, N20, C02 and Anaesthetic gas*; Trends: Minute volume, MAC and gases (02, N20, C02 and Anaesthetic gas). Display for the performance of the hospital Anaesthetic Gas Scavenging System (AGSS). Configurable interface: bright/dark, multi-language. Loops (up to 2 simultaneously): Volume-Pressure, Flow-Volume, Pressure-Flow, C02-Volume. Fresh gas virtual rotameters for 02, N20, Air. * C02, N20 and Anaesthetic gas monitoring with the accessory multigas analyzer main-stream or side-stream; 02 real-time monitoring via paramagnetic   Click Here To Download Catalogue

The MORPHEUS E is an anaesthesia machine with Electronic Flowmeters and it can be used on adult, children and newborn patients. The MORPHEUS E is suitable for administration of Oxygen – Air – Nitrous Oxide – Halothane – Enflurane – Isoflurane – Sevoflurane – Desflurane mixtures. Features: Mechanic gas mixing system Electronic lung ventilator with 12” TFT colour display Valves group: open, semi-closed, closed, heated, with soda lime absorber (1,5 Kg) SIARETEX rapid connection device, Selectatec compatible for 2 vaporizers Gas supply group Ventilation modalities: APCV-PCV; APCV-TV; PSV; APNEA BACK-UP; VC-VAC; VC-VAC BABY; SIMV+PS (volumetric); SPONT; MANUAL. Measured parameters: PAW; PEEP; Vte; ExpMV; Rate; I:E; FiO2, Pmax; Pmean; Pause; Vti; FLOWi; FLOWe; Tinsp; Tesp; Tpause; Cs; Ri Displayed ventilation curves: Paw, Flow, Volume, Loop (Volume/Paw ; Volume/Flow) Adjustable parameters: – O2 built-in Mixer device from 21% to 99% – I:E Adjustable Ratio: 1:1-1:2-1:3-1:4-2:1-3:1 – Inspiratory Flow – PEEP – Breathing Rate – Minute Volume; – Tidal Volume – Inspiratory Pressure Limit – Inspiratory Pause – Inspiratory Time – Trigger Breathing system: The breathing system of Morpheus guarantees to the user an absolute flexibility and easy handling thanks to the noble construction materials employed. The valves group can be drawn-up and it’s totally autoclavable at 121°C and all its parts are manually dismountable, with no need of special tools.The breathing system is made of; Calibrated APL valve, Fresh gas collecting bag, O2 cell for reading of FiO2, Removable 1 kg soda lime canister, Manually inspectionable bellows jar, Safety valve for ambience air suction in case of fresh gas failure, Flow transducer inside the group located on the expiratory line. Optional accessories 11054 AIRPAK 54 stand-alone medical air compressor 100150/IDF Isoflurane Vaporizer 100148/IDF Fluo-Halotane Vaporizer 100145/IDF Sevoflurane Vaporizer 100151/IDF Desflurane Vaporizer A57.049-800601 gas analysis module (5 AA – CO2 – N2O – O2 – MAC) ric.auto.   Click Here To Download Catalogue