No products in the cart.
-
KD-TS1A Automated Tissue Processor is mainly used in small laboratories to process specimens to improve the quality sections. The max number of specimens processed is 40 each time. It is popular in the market because of its space saving and simple operation.. Features: APS-coated, streamline-design, sturdy housing with high resistance to corrosion Economical, reagent saving, practical design with small footprint andlow cost Two sets of operating programs and two sets of time-extending programs; all built-in programs have memory function Single-chip computer control technology allows a complete set of functions Well-sealed plexiglass cover with gas-effluxion mechanism, environmentally friendly and safe Large-capacity reagent cup: more than 40 tissue specimens can be processed simultaneously Not affected by short blackouts or power outages during operation Manual adjustment can be conducted anytime during the programmed automatic operation; afterwards, the system automatically enters the programmed operation Internal dry heating mechanism with high-precision temperature control Two-dimensional, flexible transmission system, low noise, wear-resistant High-precision photoelectric positioning control system to ensure reliable operation and precise positioning Fully intelligent design, enabling timely determination and recovery from an abnormal event  Technical Specifications:  Number of Cups: 12 (9 for reagents, 3 for paraffin)   Capacity of Each Cup: 700 ml   Length of Processing Time in the Cup:   Any length between 0 and 99 hours for the first cup   Any length between 0 and 24 hours for the other cups   Temperature Range: RT – 80℃   Dripping Time: Approximately 30 s   Frequency of Agitation: 2 times/minute   Tissue Protection Cup: at the 7thstation   Working Voltage: AC220V±10% 50Hz (standard model) AC110V±10% 60Hz   Power Requirements: 500 W   Heating Control: heating automatically begins when the tissue enters the 2ndcup, thus avoiding unnecessary energy      waste   Dimensions: 795×435×415mm (W×D×H)   Weight: 50kgKEDEE KD-TS1A Automated Tissue Processor
-
The MTP carousel tissue processor guarantees gentle and highly reliable specimen processing in conjunction with state of the art control features. The specimen throughput can be doubled to 240 cassettes per run with a second transport basket. For faster and substantially improved processing of tissue, the instrument can optionally be equipped with vacuum units for all paraffin beakers or all positions including reagent beakers. An integrated battery ensures the highest process safety even in environments with frequent power failures. Hazardous fumes are efficiently eliminated by a fume extraction system thereby increasing user safety. Features of Slee MTP Tissue Processor: Easy loading and full process control by rotating table principle Integrated UPS system protects your samples Up to 240 cassettes per run Intuitive control panel Delayed start function System Status Monitor Password protected software  Technical Specifications of Slee MTP Tissue Processor: Nominal supply voltage / frequency: 100 – 240 V AC (+/- 10%) / 50 – 60 Hz Power draw: 250 VA Protective class: (1) I Power fuses: 2x T 6,3 A Pollution degree : (1) 2 Overvoltage installation category: II Maximum heat emission: 250 J/s Operating temperature range: +10 to +35°C Temperature range during storage: +5°C to +55°C Relative humidity: max. 80% non condensing Humidity during storage: < 8% (1) Lt. IEC 1010, EN 61010 Dimensions (W x D x H): 850 mm x 850 mm x 570 mm Weight (w/o accessories): 80 kg Reagent beakers: Standard: 2000 ml, white, polyacetal, (Optional): 2000 ml, DURAN® glass, (Optional): 2000 ml, aluminum Paraffin beakers: 2000 ml, aluminum, double walled Transport basket: Standard: 1x Stainless steel, capacity 120 cassettes, Optional: 2x stainless steel, capacity 120 cassettes each Programming: 20 programs (freely programmable), password proteced Incubation time (Exposure): 1 sec bis zu 99 h 59 min 59 sec (freely programmable) Drip of time: 30 sec up to 59 min 59 sec (freely programmable) Paraffin beaker temp.: Temperature range 40 °C to 80 °C (freely programmable) Instrument operation modes: Immediate start Fixed start time: delay programmable by to 999 hours Fixed end time: process end time delayed by up to 99 hours Quick start (factory programmed protocols) Agitation: Yes (factory setting for intensity) Power failure failsafe position: freely programmable for any protocol step Control elements: LCD display System Status Monitor Vacuum function (optional): Pressure difference 0,5 bar maximum (500 hPa)  Optional accessories for tailor-made configurations: Anodized aluminum reagent beakers Organizer tray Perspex hood Fume extraction system incl. charcoal filter Vaccuum function for paraffin beakers Vacuum function for reagent and paraffin beakers TWIN Configuration for two sample baskets Remote Alarm system  Click Here To Download CatalogueSlee MTP Tissue Processor