No products in the cart.
-
The BA210 series is a line of basic biological microscopes manufactured by Motic. The unit is equipped with Motic Infinity Optics (CCIS®, offering quality performance in the fields of education and training. The device features a coaxial coarse and fine housing with a quadruple reverse-mounted nose piece. Its contrast methods, such as phase contrast, polarization and dark field, are easily performed through optional accessories. Technical applications: Biomedical Type: Optical Observation technique: Dark field Magnification: 4 unit, 10 unit, 40 unit, 100 unitMotic BA210 Series Biomedical Microscope
-
Purpose: Determination of the filtration coefficient according to GOST 19006-73 Applied in organizations controlling quality of fuels and lubricants, in petroleum refining industry, in oil products distribution system. Shall be used to test the filtration coefficient of motor fuels according to GOST 19006-73. The device shall be assembled and the filtration coefficient shall be tested according to GOST 19006-73. Scope of delivery: 1. Graduated glass tube cut from a burette 1-2-50-0.1, according to GOST 20292-74 in a metal mount, and an extension made of Caprolon in its top – 1 pc. 2. Glass or metal cock in a mount of a filtering device – 1 pc. 3. Filter mount – 1 pc. 4. Filter seat – 1 pc. 5. Gasket 1x17x19 – 2 pcs. 6. Gasket 1x15x17 – 2 pcs. 7. Filter paper, BFDT brand, with the screening fineness not exceeding 3µm (0.33+/-0.03) mm thickness, the number of analyses – 50 pcs. 8. Volumetric flask 1-50-2, 50 cm3, according to GOST 1770-74 – 1 pc. 9. Beaker V or N, version 1 or 2, 400 or 600 cm? capacity, according to GOST 25336-82 (made of glass or polypropylene) – 1 pc. 10. Cylinder 1-50 or 3-50, according to GOST 1770-74 – 1 pc. 11. GOST 19006-73 – 1 pc. 12. Operating manual – 1 pc. 13. Storage case – 1 pc.Motor Fuel Filtering Factor Tester UOVT-01
-
Three different useful volumes : 5, 7 and 15 liters Temperature range: Ambient temperature + 5 c / 99.9 C Designed for manu general and special applications in micobiology, research and industrial laboratories. Excellent temperature control of liquid by programmable PID microprocessor control system Highly visible dual display for temperature and time. Delayed start time. Seamless stainless steel tank for easy cleaning. Excellent temperature uniformity and stability by triple insulation. Footprint almost equal to the working area to scale bench spaceNiive NB 5/9/20 Unstirred Water baths
-
NF 200 is an ideal centrifuge for small clinics, physicians’ practices and as a point-of-use instrument in larger laboratories. Blood samples, urine sedimentation and general sample preparation are catered for with the standard rotor and adaptors. The clever airflow path keeps samples from increasing in temperature above required standards. Although compact, NF 200 is robust with its epoxy-polyester powder coated steel body. Precise control via N-Prime™ microprocessor control system with a key board and large digital display makes NF 200 the instrument of choice when wanting to process a small number of samples. Maximum capacity : 12×15 ml Maximum speed : 5.000 rpm Maximum RCF : 2.822xg. Compact design for separation of blood samples, urine particle sedimentation and other routine applications in emergency and small laboratories N-Prime™ programmable microprocessor control system for accurate and reliable operations Easy programming with one button, just turn and push Two large LED displays for speed/RCF and time Possibility of programming RCF Pulse key for short centrifugation requirements Reduced temperature increase in the chamber by means of continuous air cooling through air channel in the lid Quite brushless induction drive Safety ensured by steel body, lid and chamber, lid locking system and motor over temperature protectionNuve NF 200 Bench Top Centrifuge
-
NF 400 / 400R centrifuges are designed for routine daily spin requirements. The performance and capacity of the NF 400 / 400R are ideal for separating blood samples, sedimenting urinary particles and other routine applications in small and medium-sized laboratories. The programmable N-Prime ™ control system facilitates operations. NF 400 is a ventilated model that ensures a minimum increase in temperature in the samples through the system of continuous flow of air through the air ducts in the cover. The refrigeration model, NF 400R, offers a wide temperature control range between -9 ° C and + 40 ° C for heat sensitive samples. The powerful cooling system can maintain the temperature at +4 ° C even at the maximum speed for biologically active samples. Angle Rotor Swing-out Rotors Maximum Capacity : 16x15ml 4x100ml 2xM.Plate Maximum Speed : 4,100 rpm 4,100 rpm 4.100 rpm Maximum RCF : 2.142xg 2.819xg 2.011xg Programmable microprocessor control system. Digital display for time and speed / RCF (xg). Digital display for temperature for NF 400R. Programmable relative centrifugal force (RCF). Electronic imbalance detection system. Stainless steel chamber. 1 – 99 minutes timer with hold position. 5 acceleration / 5 braking rates. Lid lock. Powerful, quiet, and maintenance free induction motor. Minimum temperature increase in the chamber by means of ventilation system for NF 400. Temperature control between -9°C / +40°C for NF 400R. Motor over heating protection. Wide range of accessories to accommodate most manufacturers’ tubes and microtiter plate. Totally CFC free refrigerant fluid and insulation material for NF 400R.Nuve NF-400 / NF-400R Medium Capacity Centrifuges
-
Purpose: Octane meter is intended for determination of Research Number (RON) and Motor Octane Number (MON) of automobile petrol and cetane number of diesel fuels during the operational check over field and laboratory conditions. Range of application: – testing laboratories of the petroleum refineries and petroleum storage deports for the control of stability of technological processes; – agencies carrying out petroleum products quality audit for conformity to requirements of national standards; – research laboratories Technical specifications: Types of controllable fuel – Automobile petrol and Diesel fuel – Octane number range – 66?98 – Cetane number range – 30?70 Measurement error: – octane number, no more – ±1.0 – cetane number, no more – ±1.0 Measurement time, no more than, sec – 10 Power supply: – battery – model 6F22, voltage9V – adapter – DC 12V/25mA Continuous running time, hours – 10 Operating conditions: – ambient temperature, °C – 10? +35 – relative humidity, % @35°C – 95 – atmospheric pressure, mm Hg – 630?800 Overall dimensions: – electronic block, WxLxH, mm, no more than – 76x210x23 – sensor, DiaxH, mm, no more than – 48×110 – total weight, kg, no more than – 1.2 Including: – electronic block, kg, no more than – 0.8 – sensor, kg, no more than – 0.3 Mean Time Between Failures, not less than, hours – 1000Octane Meter PE-7300
-
Capacity: 25L Power: 850W Shelves: 2(PCS) Timing Range: 1~9999min Product The sterilizer takes advantage of high temperature disinfection principle, which destroys cell bioplasm, denatures protein and concentrates electrolyte to kill microorganisms. Features: Microprocessor temperature controller Rapid sterilization time Forced air convection Auto stop when temperature over limit Air inlet adjustment & timing control Specifiation: Electrical Requirement: 220V 50Hz Temperature Range: RT+10~200ºC/RT+10~250ºC Display Resolution: 0.1ºC Ambient Temperature: +5~40ºCOMEGA 50L
-
Product Double walled, Outer body is made of Mild Steel duly powder coated and Inside Chamber is made of Stainless Steel 304. Insulation is done with Mineral Wool Heating Elements made of high quality Kanthal wire embedded on 3 side ribs. Temperature Range from ambient to 250°C + 1°C. Ventilators on two sides. To work on 220/230 Volts AC supply Temperature accuracy +/- 2°C Temperature Uniformity +/- 1°C 3 Stainless steel shelves (Removable) Display : Digital Display of Temp and Time with their Controller Sensor : Pt 100 Safety Device : Over temperature protection Electric leakage breakage Temperature safety Doors : Solid doors w/silicone rubber gasket & lockOmega hot air oven
-
Capacity: 25L Power: 850W Shelves: 2(PCS) Timing Range: 1~9999min Product The sterilizer takes advantage of high temperature disinfection principle, which destroys cell bioplasm, denatures protein and concentrates electrolyte to kill microorganisms. Features: Microprocessor temperature controller Rapid sterilization time Forced air convection Auto stop when temperature over limit Air inlet adjustment & timing control Specifiation: Electrical Requirement: 220V 50Hz Temperature Range: RT+10~200ºC/RT+10~250ºC Display Resolution: 0.1ºC Ambient Temperature: +5~40ºCOMEGA O25L
-
The Blood Mixer is specially designed for vacuum blood tube mixing. It is an ideal instrument of blood corpuscle analyzer and blood flow analyzer for full sample mixing in laboratories with high mixing efficiency & consistency. Main Technical Data: Rolling Speed: 12-32 rpm Tube Qty per : 1-15 pc Tube diameter: Ø13±0.1mm Working Disc Diameter: Ø 220mm Angle of Inclination: 38° Voltage: AC220V±10% (50/60Hz) Power Consumption: 6w Working System: continue Safety Category: I series B type common deviceOMEGA RM4 BLOOD MIXER
-
Specifications: Power Supply: AC 220V/110V 50Hz/60Hz Motor Power: 40W Speed: 0-2400rpm, Stepless regulation Rotating Head: Sponge headOMEGA SK-1 VORTEX MIXER
-
Purpose: PE-8300 stirrer is intended for stirring a fluid of various viscosity, liquids and solid bodies, liquids and bulk solids Advantages: The Overhead Stirrer is fitted with built-in control unit with LCD, memorized settings function, motor protection against overload and overheating. Suitable for stirring: – aqueous solution – 1 mPa/s – liquid adhesive and fluid paint – 70-500 mPa/s – many kinds of paint and enamel – 500-3000 mPa/s с – color concentrate – 3000-30000 mPa/s – thick glue (for parquet or linoleum) – 30000-50000 mPa/s Technical specifications: – Max. viscosity of fluid, mPa/s – 50000 – Volume of stirred sample, L – 0.25 – 20.0 – Rotation speed of stirrer shaft, rpm – 100 to 3000 – Max. rotational moment, Ncm – 60 – Max. stirrer shaft diameter, mm – 8(10) – Max. stirrer shaft length – unlimited – Rotational speed accuracy of stirrer, rpm – ±20 об./мин – Max. power consumption, W – 100 – Supply voltage (50 Hz),V – 220 ± 10 – Dimensions of the unit (stand rod included), mm -100х190х255 – Weight, kg – 4.4 Scope of supply: 1. Overhead Stirrer – 1 pc 2. Propeller stirrer IM – 1 pcOverhead stirrer PE-8300 (without stand rod)
-
Purpose: PE-8310 stirrer is intended for stirring a fluid of various viscosity, liquids and solid bodies, liquids and bulk solids. Advantages: The Overhead Stirrer is fitted with built-in control unit with LCD, memorized settings function, motor protection against overload and overheating. Suitable for stirring: – aqueous solution – 1 mPa/s – liquid adhesive and fluid paint – 70-500 mPa/s – many kinds of paint and enamel – 500-3000 mPa/s с – color concentrate – 3000-30000 mPa/s – thick glue (for parquet or linoleum) – 30000-50000 mPa/s Technical specifications: – Max. viscosity of fluid, mPa/s – 50000 – Volume of stirred sample, L – 0.25 – 20.0 – Rotation speed of stirrer shaft, rpm – 100 to 3000 – Max. rotational moment, Ncm – 60 – Max. stirrer shaft diameter, mm – 8(10) – Max. stirrer shaft length – unlimited – Rotational speed accuracy of stirrer, rpm – ±20 об./мин – Max. power consumption, W – 100 – Supply voltage (50 Hz),V – 220 ± 10 – Dimensions of the unit (stand rod included), mm – 420х380х800 – Weight, kg – 12 Scope of supply: 1. Overhead stirrer – 1 pc 2. PE-2730 stand rod – 1 pc 3. Holding ring – 1 pc 4. Clamp for fastening the stirrer on the stand rod – 1 pc 5. Clamp for fastening the holding ring on the stand rod – 1 pc 6. Two-finger grip (for flasks) – 2 pcs 7. Three-finger grips (for flasks) – 2 pcs 8. Clamp for grips – 4 pcsOverhead stirrer PE-8310 (rack PE-2730)
-
Purpose: The flash point tester PE-TVZ is intended for usage as laboratory equipment to perform closed cup flash point determination of oil products according to method B EN ISO 2719: 2002 and ASTM D93 are considered for oil products testing. Technical specifications: – Maximum heating temperature, °C – up to 370 – Power supply voltage from AC mains with frequency of 50Hz, V – 220±22 – Power consumption, no higher than, W – 400 – Instrument weight, kg – 6.8 – Service life, years at least – 5 Operation conditions: – Air temperature, °C – 15?35 – Relative humidity, % – 30?90 – Overall dimensions (body), mm: – Length, mm – 307 – Width, mm – 255 – Height, mm – 153 – Range of flash point determination, °C – 25-370 – Ignition device, type – oil Complete set: 1. Pensky-Martens Closed Cup Flash Point Tester PE-TVZ- 1 pc. 2. Thermometer- 1pc. 3. Operation manual- 1 pc. 4. ASTM D93 5. Stowage box- 1 pc.Pensky-Martens Closed Cup Flash Point Tester PE-TVZ