No products in the cart.
-
Product Being a leading enterprise of this industry, we are offering a huge range of I15 Blood Gas Analyzer. Other details: POCT system for Blood Gas, Electrolyte, Biochemical analysis FDA approved system Auto sampling method avoids sampling errors Innovative microchip technology and micro sensor multi function membrane technology Single use cartridge to avoid reagent contamination Liquid calibrator calibrating each cartridge, before sampling Easy protocol without any maintenance steps Temperature correction for the sample results Sample type entry for different samples Up to 10000 sample result memory Fully charged battery can perform up to 50 samples Electronic simulator to check the quality of the system Calibrator and Control ensure the quality of the results Multi-parameter cartridge helps to manage the time and inventory 10 parameters provided in single cartridge includes Lactate, Calcium, pH, pO2, pCO2, Hct, Cl, Na, K, GlU, Anion Gap etc. Sample volume 140 ul Color LCD with touch screen 1 minute for results, after sample aspiration LAN/Wifi connectivity with LIS Built in printer for resultsEdan Blood Gas Analyzer
-
The Edan i15 Blood-Gas Analyzer analyzes pH, pCO2, pO2, Na +, K +, Cl, Ca ++, Glu, Lact and Hct. The Analyzer uses a disposable reagent pack with flushing solution, tonometers, and a waste container. You don’t need a gas cylinder. This new design avoids biological risk and environmental contamination. Routine maintenance is limited to changing the reagent pack. The unique design of the disposable sensor cards, combined with the reagent module of variable capacity according to the number of samples per day, ensure low cost and economic operation per sample. Simple menus through a touch screen guide the user on the operation of the analyzer. It is a POCT analyzer specially designed for emergencies, it is portable, easy to use and performs flexible test panels with disposable cards. Edan i15 brings a new era in blood gas analysis by enabling faster and more efficient control and management of patient samples. Features of Edan i15 Blood-Gas Analyzer: Practical reagent pack for 50 or 100 samples QC 3- 5 levels of control Built-in barcode reader User-friendly touch screen 6 types of cards with multi-combinable parameters Automatic sample aspiration Built-in printer Low cost per test Technical specifications of Edan i15 Blood-Gas Analyzer: Type of sample Arterial, venous or capilar whole blood Parámetros medidos: pH, pO2, pCO2, Na+, K+, Cl, Ca2+, Glu, Lac y Hct Calculated parameters: Actual Bicarbonate (HCO3A) Standard Bicarbonate (HCO3S) Base Excess (BE) Standard Base Excess (SBE) Alveolar-arterial oxygen pressure gradient (pO2 A-a) Respiratory index. (RI) Sample Volume: 140 µLEdan i15 Blood-Gas Analyzer
-
The device ensures that the chemical solutions and samples are kept constant at the desired temperatures for the desired periods and also provides homogeneous temperature distribution in the inner boiler with its circulation pump. Feature The device is used to heat chemicals used in laboratories without being exposed to open flame. Glass wool is used as insulation material in the device. Since there is no heater or pump in the chamber, there is no loss in net volume. The device provides precise temperature measurement thanks to its microprocessor control. Additional security measures have been taken against overheating with the safety thermostat that can be adjusted between 30-90 degrees. There is a drainage system for the discharge of excess water in the device. The inner chamber is made of monoblock stainless steel with rounded corners to reduce the risk of contamination in the device. The outer body is stainless steel made of electrostatic painted galvanized sheet. The device offers the user the opportunity to program between 0 and 99.99 hours. The device provides wide usage opportunity with delayed start and indefinite operating mode. Emsaş A.Ş. All medical devices manufactured by us are guaranteed for 2 years.Emsas ESB10 Water Bath
-
Three different sizes: 25, 55 and 120 liters. Temperature range: Ambient Temperature +5°C / 80°C. Excellent incubation conditions for the applications in biology and microbiology laboratories such as medical and veterinary fields; research & quality control examinations in pharmaceutical, food & cosmetics industries and biotechnology. Programmable PID microprocessor control system. User friendly control panel located on the door,including digital displays for temperature and time. Stainless steel interior for easy cleaning and decontamination. Air jacketed heating system and triple insulation for highly precise & constant temperatures. Very homogeneous temperature distribution by natural air convection: Minimum turbulance and no cross contamination. Frameless inner glass door for the observation of samples without any temperature drop. Safety thermostat as standard. Optional NüveTherm™ data control software and RS 232 kit.EN 025/055/120 Incubators
-
Three different sizes: 22, 44 and 120 liters. Temperature range: Ambient Temperature +5°C / 80°C. Excellent incubation conditions for the applications in all biology and microbiology laboratories such as medical and veterinary fields; research and quality control examinations in pharmaceutical, food and cosmetics industries and in biotechnology. Programmable PID microprocessor control system. User friendly control panel including digital displays for temperature and time. Delayed start timer. Anodic-oxidated aluminum chamber for standard models; stainless steel chamber for “P” models. Very homogeneous temperature distribution obtained by natural air convection for standard models and by forced air ventilation for “P” models. Frameless inner glass door for the observation of samples without any temperature drop. Safety thermostat as standard.EN 300/400/500 Incubators
-
enGen™ Automation is designed to work with your all of your VITROS® Systems—VITROS® 5600 Integrated System, VITROS® 4600 Chemistry System, VITROS® 3600 Immunodiagnostic System, VITROS® 5,1 FS Chemistry System, VITROS® ECiQ Immunodiagnostic System (off-track), and VITROS® 250/350 Chemistry System (off-track).enGen™ Automation
-
Eppendorf™ Refrigerated Centrifuge 5424 R are the new laboratory standard with a 24 place capacity that makes it suitable for all modern molecular biology applications in tubes. Features: Max. speed: 21,130 × g OptiBowl™ design for quiet operation, even without a rotor lid Soft-touch one-finger lid closure for ergonomic operation ECO power shut-off engages after 8 hours of non-use to reduce energy consumption (40 % over night) and extend compressor life (can be deactivated) FastTemp function for quick pre-cooling of the centrifuge, e.g. from 21°C to 4°C in only 8 minutes Guaranteed temperature of 4°C at maximum rotational speed Built-in condensation drain to eliminate water accumulation in the rotor chamber The patented compressor technology reduces vibrations and protects your samples Technical Specifications: Capacity: 24 x 1.5/2mL vessels Refrigerated: Yes Product Type: Refrigerated Centrifuge Max. Speed: 15,000rpm Electrical Requirements: 230 V / 50 – 60 Hz Temperature Range: Between -10 to 40°C  Click Here To Download CatalogueEppendorf 5424R Refrigerated Centrifuge
-
Powerful and user-friendly MiniSpin Centrifuge are small enough so that each workstation can be equipped with a “personal” centrifuge. The rotor, inner centrifuge lid, and lid latch are made of metal for maximum operation safety. Features: Rotor capacity: 12 x 1.5/2.0 mL vessels, 2 x PCR strip Max. speed: 14,100 x g (14,500 rpm) Extremely compact footprint — measures 9”W x 4.”H x 9ó”D! Aluminum rotor accommodates twelve 1.5- or 2.0-mL tubes (maximum diameter of 11 mm) Rotor can be autoclaved at 121°C for 20 minutes Minimal sample heat transfer — maximum of 12°C after 20 minutes at max speed Eliminate costly repairs with the low maintenance drive Soft-touch lid closure for ergonomic lid locking — and releases automatically at the end of a run Technical Specifications: Speed: 800 – 13,400 rpm (100 rpm steps) Capacity: 12 x 1.5/2.0 mL Electrical: 120 V, 60 Hz Dimensions: (W x D x H) 22.6 x 23.9 x 12.0 cm Weight: 4.3 kg  Click Here To Download CatalogueEppendorf Minispin Centrifuge
-
Eppendorf Vortex Mixer is Compact, versatile vortexer accommodates micro test tubes, PCR plates, deep well plates, and MTPs. Noise Level: <50 dBA Touch Vortex Speed: 3500 rpm Mixing and Vortexing Radius: 1.5 mm (3 mm mixing stroke) Mixing Speed: 300–3000 rpm (in 50 rpm increments) Adjustable Mixing Time: 15 sec. to 99.5 hr., continuous Weight: 4.2 kg (9.3 lbs.) Dimensions: 17W x 23D x 13H cm (611/16 x 91/16 x 51/8″)Eppendorf Vortex Mixer
-
The advanced B111 Bilirubinmeter provides fast, accurate results for Total bilirubin level in neonates with only 40μl serum or plasma sample. It determines total bilirubin by dual wavelength photometric analysis. Suited for pediatric setups, small workload labs & hospitals because of its compact and portable design. Advanced, benchtop and precise instrument for measuring Total Bilirubin. Feature Auto zero function: Manual blanking not required Dual wavelength measurement system: 2 wave lengths 455nm and 575nm Plays major role to remove the interference caused due to Hemolysis & turbidity of sample LED Light source: LED does not require replacement as it lasts longer As compared to Lamp, LED are more suitable as there is no intensity fluctuations No warm up time required. Flexible unit selection: Two units either mg/dl or umol/L are selectable, ease of reporting Compact slot for Capillary: Accuracy of results are directly related to proper alignment of Capillary B-111 has the easiest mode to ensure precise values Data transfer: External device can be connected to instrument through RS232 por USB port Technical Specification Light source – LED Wavelength – 455nm and 575nm Net weight – 1kg Measuring range – 0-30 mg/dl , 510 umol/L Display – 16×2 LCD module with backlight Auto calibration – Yes Sample type – Serum or plasma Sample volume – 40-80μL Test time – <5sec Units – mg/dl or umol/L Dimensions – 150 (W) × 115 (H) × 190 (D) mm Interface – RS232 Reading cuvette – Heparinized micro capillary holder Storage temperature – 15-40°c Power supply – DC 9V(DC adapter) Power consumption – <2WErma B-111 Bilirubin Meter
-
Purpose: ES-8000 D extractor shall be used for extraction concentration of heavy metals, petroleum hydrocarbons, polyaromatic hydrocarbons, organochlorine compounds and other pollutants from water samples by any organic solvents in separating funnels, round-bottomed flasks and flat-bottomed flasks, with the IM9 fluoroplastic turbine stirrer used to create high-speed radial liquid flows to ensure effective mixing and uniform distribution of extraction agent throughout the sample volume. Extractor is provided with electronic stepless speed control unit. Technical specifications: – Volume of water sample, L – 0.25-1.0 – Rotation speed of stirrer shaft, rpm – 100-3000 – Maximum power consumption, W – 50 – Supply voltage (50 Hz), V – 220 ± 10 – Overall dimensions, mm – 420х380х800 – Weight, kg – 8.5 Scope of delivery: 1. Overhead stirrer ES-8000 D – 1 pc. 2. ES-2720 rack for stirrers – 1 pc. 3. Clip – 2 pcs. 4. Fluoroplastic turbine stirrer IM9 – 1 pc. 5. ТS-2 sealing unit made of fluoroplastic – 1 pc. 6. Holding ring – 1 pc. 7. Round separating funnel (volume 1 L) – 1 pc. *The same as Extractor PE-8300 (without timer)Extractor ES-8000D
-
Purpose: PE-8000 extractor shall be used for extraction concentration of heavy metals, petroleum hydrocarbons, polyaromatic hydrocarbons, organochlorine compounds and other pollutants from water samples by any organic solvents in separating funnels, round-bottomed flasks and flat-bottomed flasks, with the IM9 fluoroplastic turbine stirrer used to create high-speed radial liquid flows to ensure effective mixing and uniform distribution of extraction agent throughout the sample volume. Extractor is provided with electronic stepless speed control unit. Extractor is provided with built-in control unit with large LCD. It is possible to set a timer. Technical specifications: – Volume of stirred sample, L – 1.0 – Rotation speed of stirrer shaft, rpm – 100-3000 – Maximum torque, H-cm – 60 – Maximum diameter stirrer shaft, mm – 10 – Accuracy of speed maintenance, rpm, at least – ±20 – Stirrer material – PTFE and stainless steel – Stirrer type – turbine – Maximum power consumption, W – 100 – Power supply voltage (50 Hz), V – 220 ± 10 – Overall dimensions (with rack), mm – 420х380х800 – Weight, kg – 9 Scope of delivery: 1. Overhead stirrer PE-8300 – 1 pc. 2. ES-2720 rack for stirrers – 1 pc. 3. Clamp for fastening the stirrer on the rack – 1 pc. 4. Clamp for fastening holding ring on the rack – 1 pc. 5. Fluoroplastic turbine stirrer IM9 – 1 pc. 6. ТS-2 sealing unit made of fluoroplastic – 1 pc. 7. Holding ring – 1 pc. 8. Round separating funnel – 1 pc.Extractor PE-8000
-
Three different sizes: 22, 44 and 120 liters. Temperature range: Ambient Temperature +5°C / 250°C. Designed for sterilization, drying and heating purposes. Programmable PID microprocessor control system. Easy to use control panel including digital displays for temperature and time. Delayed start timer. Excellent uniformity and stability of temperature by high grade of insulation and microprocessor control system. Anodic-oxidated aluminum chamber for standard models; stainless steel chamber for “P” models. Very homogeneous temperature distribution obtained by natural air convection for standard models and by forced air ventilation for “P” models. Low temperature loss by means of the door pressing firmly and tightly against the chamber gasket. Outlet port for vapour exhaustion. Safety thermostat as standard.FN 300/400/500 Dry Heat Sterilizers / Ovens
-
Heating Mantle PE-4100 (0.5L) Digital Purpose: the heating mantle is intended for heating liquids in round-bottomed flasks made of heat-resistant glass with the volume of 500 ml within the temperature range from the ambient one to 400°С Advantages: – two-zone heating with the possibility of switching off the heating of the top zone – heating element is made of safe fiberglass with nichrome wire which excludes permanent deformation and provides firm adherence to vessel walls to avoid heat losses and improve energy performance of the device – indication of parameters on the liquid crystal display – electronic (PID) temperature controller – automatic and heating tuning of the heating intensity – timer with visual and audible signalling of finishing of the heating – locking of the control to provide the protection against accidental change of the operation mode – possibility of connection of a remote sensor (option) – determination and indication of the possible faults and malfunctions – metal housing of the device is covered with powder paint KARUMEL which provides resistance to adhesion, scratching and corrosion Remarks: – the maximum heating temperature is reached when both heating zones are switched on – due to presence of heat losses, the liquid temperature in the vessel can never reach the maximum temperature of the heating element; therefore, the settable temperature is limited by a value of 400°С. Technical specifications: – Housing material: steel covered with powder paint resistant to chemical action – Heating element: fabric fiberglass with nichrome wire – Maximum heater temperature, °С – 450 – Flask volume, ml – 500 – Weight, kg – 3.4 – Power supply voltage (50/60Hz), V – 220-230 – Power consumption, W – 230Heating Mantle PE-4100 (0.5L) Digital
-
Purpose: the heating mantle is intended for heating liquids in 3 round-bottomed flasks with the volume of 500 ml within the temperature range from the ambient one to 450°С Advantages: – independent control of each heating element – two-zone heating with the possibility of switching off the heating of the top zone – heating element is made of safe fiberglass with nichrome wire which excludes permanent deformation and provides firm adherence to vessel walls to avoid heat losses and improve energy performance of the device – indication of parameters on the liquid crystal display – electronic (PID) temperature controller – automatic and heating tuning of the heating intensity – timer with visual and audible signaling of finishing of the heating – locking of the control to provide the protection against accidental change of the operation mode – possibility of connection of a remote sensor (option) – determination and indication of the possible faults and malfunctions – metal housing of the device is covered with powder paint KARUMEL which provides resistance to adhesion, scratching and corrosion – complete set of supports is included Remarks: – the maximum heating temperature is reached when both heating zones are switched on – due to presence of heat losses, the liquid temperature in the vessel can never reach the maximum temperature of the heating element; therefore, the settable temperature is limited by a value of 400°С Technical specifications: – Housing material: steel covered with powder paint resistant to chemical action – Heating element: fabric fiberglass with nichrome wire – Maximum heater temperature, °С – 450 – Flask volume, ml – 3×500 – Weight, kg – 8.4 – Dimensions (LхWхH) – 610х310х120 – Power supply voltage (50/60Hz), V – 220-230 – Power consumption, W – 3×230Heating Mantle PE-4100-3 (3×0.5L) Digital with Set of Racks