Anaesthetic Machine

The Genesis anaesthesia workstations meet your most ambitious requirements. They stand out for their lung protective ventilation, accuracy and performance, cost saving, design and ergonomics, safety and versatility.   TECHNICAL SPECIFICATION OPERATING DATA Weight – 105 kg Dimensions – 92 cm Wide x 68 cm Deep x 139 cm High (93 cm to the table surface) Packaging Dimensions – 105 cm Wide x 75 cm Deep x 160 cm High Operating voltage supply – 110 to 240 V~, 47 to 63 Hz (12 to 6 A) Power input – 120 W typically (max. 1.2 kW with auxiliary outlets used) Battery autonomy – 90 min typically Auxiliary power outlets – 4, with automatic protection O2, N2O and Air supply – 2.7 to 6.9 bar (39.1 to 100 psi) Screen – TFT 18.5″ (47 cm) projected capacitive touchscreen Protection class – Class I, gas analyser type BF defibrillation proof Classification – Class II b Storage – One front drawer with self-brake system and two back cabinets with door Lighting – LED bar below the screen controlled from the touchscreen Auxiliary integrated systems – Auxiliary 02 flow meter (0-15 L/min), Auxiliary 02 suppy valve (NF standard) and Suction device Communication ports – 1 x RS-232, 2 x USB, 1 x LAN Ethernet Fresh Gases (02, N20 and Air, electronically controlled) Fresh gas flow – 0 and 0.1 to 18 L/min 02/N20/Air Accuracy – 0.1 to 0.5 L/min = ±0.05 L/min; 0.5 to 18 L/min = ±10 % 02 concentration – 21 to 100% vol. with Air, 25 to 100% with N20 (minimum 200 ml/min 02) 02 Safety fresh gas (backup) – 0-0.2-0.4-0.7-1-1.5- 2- 3- 4- 6- 8-10-12-15 L/min 02 02 flush (+02) – 40 L/min standard (adjustable 25 – 75 L/min upon requirement) Breathing System (CABS) Autoclavable – 134 °C Weight of breathing system – 9.8 kg C02 absorber volume – 1.5 L Leakage – < 150 mL/min (at 30 hPa) Pressure limiting valve APL – 0 to 70 hPa Pressure relief valve – 125 hPa Vacuum safety valve – 0.3 hPa resistance at 60L/min – 5.80 hPa resistance at 60L/min – 2.90 hPa resistance at 30L/min – 3.55 hPa resistance at 30L/min – 0.89 hPa Internal Compliance at 30 hPa – 15 mL   VENTILATOR Operation / Ventilation Modes Volume controlled (VC) modes: Volume Controlled Ventilation (VCV) VC Synchronized Intermittent Mandatory Ventilation (VC-SIMV) VC-SIMV with Pressure Support (VC-SIMV-PS) * Pressure controlled (PC) modes: Pressure Controlled Ventilation (PCV) PC Synchronized Intermittent Mandatory (PC-SIMV) PC-SIMV with Pressure Support (PC-SIMV-PS) * Adaptive Pressure with Volume Guaranteed (APVG) modes (other trade names: Autoflow,PCVR, PRVC, AVAPS, VC+) Adaptive Pressure with Volume Guaranteed (APVG) * APVG Synchronized Intermittent Mandatory (APVG-SIMV) * APVG -SIMV with Pressure Support (APVG-SIMV-PS) * Pressure Support Ventilation (PSV) * (other trade names: PS, ASB, SPS, IPS)   Non-mechanical Operation / Ventilation Modes Manual ventilation through the CABS system (Auto/Manual software controlled) Spontaneous ventilation either through the bellows (auto mode) or through the bag (manual mode) Manual ventilation through the external fresh gas outlet for non-rebreathing systems (Bain, Mapleson, …) Application field: Neonates, Pediatrics & Adults Tidal volume – 5 to 1500 mL Inspiratory pressure – 0 to 68 hPa Ventilation frequency ­- 3 to 120/min Inspiratory time – 0.05 to 16.6s l:E ratio – 5:1 to 1:8 Inspiratory pause – 0 to 60% Inspiratory flow – max. 150 L/min PEEP – 0 to 30 hPa Flow trigger – 0.2 to 15 L/min Pressure support – 5 to 50 hPa Ramp time – 0.1 to 2 s Maximum pressure – 0 to 68 hPa   MONITORING 5″ (47 cm) projected capacitive touchscreen, supported on a 360° rotating and 2 axis tilting arm. Measurements displayed: Peak pressure; Plateau pressure; Mean pressure; Expiratory minute ventilation; Expiratory tidal volume; Inspiratory tidal volume; Expiratory volumeter; Breathing rate; Compliance and Resistance (in VC modes); Patient info (age, weight, MAC, Class ASA); Connected sensors; Battery status; Power supply status; Gases supply pressures for 02, N20 and Air; Inspiratory and expiratory concentration of 02, N20, C02 and Anaesthetic gas* Parametres charted as curves (up to 3 simultaneously): Airway pressure; Expiratory flow; Inspiratory flow; Volume; Fresh gases (Rotstyle); Concentration of 02, N20, C02 and Anaesthetic gas*; Trends: Minute volume, MAC and gases (02, N20, C02 and Anaesthetic gas). Display for the performance of the hospital Anaesthetic Gas Scavenging System (AGSS). Configurable interface: bright/dark, multi-language. Loops (up to 2 simultaneously): Volume-Pressure, Flow-Volume, Pressure-Flow, C02-Volume. Fresh gas virtual rotameters for 02, N20, Air. * C02, N20 and Anaesthetic gas monitoring with the accessory multigas analyzer main-stream or side-stream; 02 real-time monitoring via paramagnetic   Click Here To Download Catalogue

The Morpheus LT is an anesthetic machine suitable for treatment of adults, children and new-borns. lt is provided with a mechanical 3-gas flowmeters group and a group tor rapid connection of two vaporizers in line and it is supplied with an advanced manual ventilation system, APL system, or AUX system with traditional To-and-Fro valve switched on and off automatically by ventilator. The unit frame is made tor 30% of light alloy and for 70% of fullyrecyclable plastic materiai. Thanks to the materiai used, the Morpheus has a total weight of less than 80 kgs. LUNG VENTILATOR The ventilator works by a microprocessor electronic control system with a simple and intuitive interface, which allows the anesthetist to operate in a clear and safe way. The system is provided with 3 dedicated software to have automatically the default settings for adult and paediatric patients and new-borns. lt is provided with the automatic compensation of dead space, the leakages calculation and the automatic calibration of Fi02. Operative Modes: MAN VC-VC PCV-APCV APCV P -SIMV V- SIMV Measured parameters: PAW RATE VM – VTE T INSP Fi02 MANUAL VENTILATION SYSTEM The Morpheus is equipped with an advanced manual ventilation system that can be switched on and off automatically by the ventilator; the operator can select the APL system or the AUX system with traditional T-and-Fro valve and 02 by pass safety system. BREATHING SYSTEM The patient group of Morpheus LT is compact, lightweight for manual removal and fully autoclavable. The patient circuit group is supplied with an automatic heating system avoiding humidity with possibility to use reusable and rechargeable CO, absorbers (TOP SPECIAL) of 1 kg. Absorber is with quick-release enabling replacement also during anaesthesia. The group is supplied with an exposed bellow that can be manually inspected. The MorpheusLT is equipped with 3 wide and large drawers and a large work-shelf to facilitate operating rooms procedures. Click Here To Download Catalogue